If I asked you what the most used appliance in your home is, you would probably say your oven, or your washer and dryer. In almost every home, it’s the water heater. You would be hard-pressed to find a household that doesn’t use its water heater every day. Because of this, most units take on a lot of wear and tear after it their installation.
If you use your water heater a lot, you will inevitably be calling a professional for water heater installation gloucester va has to offer. Of course, you would like to delay this situation for as long as possible. A typical water heater lasts about 10 years before it needs to be replaced, especially if it receives regular maintenance during that period. Besides regular maintenance, here are a few tips you can use to ensure your water heater last as long as possible.
Tips to make your water heater last as long as possible
- Regulate the temperature – Regulate the temperature of your water heater on a regular basis. Check that the thermostat is set to 120 degrees at all times. It may need to be a little higher if you use your unit a lot and it is an electric unit.
- Anode rod – Place an anode rod in your unit as it gets older. Because of the water stored in the tank, corrosion is inevitable. An anode rod attracts these corrosive elements, delaying the corrosion of the inside walls of the tank.
- Flush it – Flushing your water heater is the easiest regular maintenance you can do yourself and will help flush out mineral build up that can speed up corrosion. If you aren’t comfortable doing it, hire a professional to do it for you about once a year.
Just following these three tips will go a long way towards extending the lifespan of your water heater. Be sure to have regular maintenance performed on it by a professional as well. Most units come with a maintenance schedule laid out as part of the factory warranty.